Arc splitting process in low voltage switching devices considering variable magnetic field
Published 2019-10-30
How to Cite
Abstract
Electric arc is a complex phenomenon that associates high current densities and temperatures; therefore, this must be extinguished rapidly to avoid future damage in low voltage devices. An early extinction of electric arc in low voltage switching devices leads to safety in industrial processes and protects electronic devices as well as their operators. Since the formation and propagation time is small (micro-seconds), the decision-making through experimentation for the design of new switch models is costly and often ineffective for not being capable of quantifying specific variables of the electric arc. To obtain and propose improvements in the design of low voltage switches, modeling is an excellent tool to analyze the most influential parameters in the current interruption. This option allows systems optimization by a magnetohydrodynamic model without building and testing a lot of expensive prototypes.
References
- Nilsson A. (2014). Pre-stud of Arc Extinguish Techniques for a 4-Pole 1500 VDC Contactor. Maestry dissertation. Chalmers University of Technology, Gothenburg, Sweden.
- Mutzke A., Ruther T., Kurrat M., Lindmayer M. & Wilkening E.D. (2007). Modeling the Arc Splitting Process in Low-Voltage Arc Chutes. Proceedings of 53rd IEEE Holm Conference on Electrical Contacts, pp. 175-182
- Yang F., Rong M., Sun Z., Wu Y. & Wang W. (2008). A numerical study of arc-splitting processes with eddy-current effects. 17th International Conference on Gas Discharges and Their Applications, pp. 197-200
- Singh A. K., Ahmmed N. & Atharparvez M. (2015). Numerical simulation of arc splitting process in a LV switching device considering thermo-field emission mechanism. IEEE 61st Conference on Electric Contacts, pp. 391-399
- Iturregi A., Barbu B., Torre E., Berger F. & Zamora I. (2017). Electric Arc in Low- Voltage Circuit Breakers: Experiments and Simulations. IEEE Transactions on Plasma Science, volume 45, issue 1, pp 113-120.
- Iturregui A. (2013). Modelization and analysis of the electric arc in low voltage circuit breakers. PhD. dissertation, Univ. Basque Country, Bilbao, Spain.
- Lindmayer M., Marzahn E., Mutzke A., Rüther T. & Springstubbe M., (2016). The Process of Arc-Splitting Between Metal Plates in Low Voltage Arc Chutes. IEEE Transactions on Components and Packaging Technologies, volume 29, issue 2, pp. 310-317.
- Prabu A.,(2014). An inverse problem approach to modeling of circuit breaker arc voltage. International Symposium of Fundamentals of Electrical Engineering, pp. 1-4.
- Murphy A. B., (1995). Transport coefficients of air, argon-air and oxygen-air plasmasâ€. Chemistry and Plasma Processing, vol. 15, no. 2, pp. 297-397.