Vol. 21 No. 1 (2011)
Artículos de investigación

Diseño, fabricación y prueba de una antena de parche para GPS en aplicaciones automotrices

M. Tecpoyotl-Torres
J. G. Vera-Dimas
J. Varona
J. Escobedo-Alatorre
S. V Koshevaya
J. Sánchez-Mondragon

Published 2011-04-01

Keywords

  • Array,
  • Array,
  • Array,
  • Array

How to Cite

Diseño, fabricación y prueba de una antena de parche para GPS en aplicaciones automotrices. (2011). Acta Universitaria, 21(1), 36-44. https://doi.org/10.15174/au.2011.54

Abstract

This work is focused on the development of a prototype patch antenna designed for use asa replacement antenna in automotive Global Positioning Systems (GPS). In simulations andtesting of the prototype, the focus was on the antenna gain. Transmission-reception testingwas done to verify the operation frequency. The prototype was tested with a commercial GPSkit to evaluate its performance as a replacement antenna. Laboratory testing showed that itcomplied with the minimum requirements for both reception and transmission frequencies,while testing on a stationary vehicle showed slight variations when compared to the positiondata obtained using the same kit with its original antenna. In non-stationary testing, positiondeterminations made with the prototype were sufficiently precise for use.

References