Vol. 26 No. 2 (2016)
Artículos de investigación

Electrical and thermal characterization of a composite material of HDPE/PPy/CB/CNT

PDF (Spanish) HTML (Spanish)
Ecua1pdf (Spanish) Ecua1 (Spanish)
  • René Salgado-Delgado,
  • Alfredo Olarte-Paredes,
  • Areli M. Salgado Delgado,
  • Zully Vargas Galarza,
  • Edgar García Hernández,
  • Efraín Rubio Rosas,
  • Teresa López Lara,
  • Juan Bosco Hernández Zaragoza
René Salgado-Delgado Instituto Tecnológico de Zacatepec

Bio
Alfredo Olarte-Paredes Instituto Tecnológico de Zacatepec

Bio
Areli M. Salgado Delgado Instituto Tecnológico de Zacatepec

Bio
Zully Vargas Galarza Instituto Tecnológico de Zacatepec

Bio
Edgar García Hernández Instituto Tecnológico de Zacatepec

Bio
Efraín Rubio Rosas Centro Universitario de Vinculación y Transferencia de Tecnología
Teresa López Lara Universidad Autónoma de Querétaro

Bio
Juan Bosco Hernández Zaragoza Universidad Autónoma de Querétaro

Bio

Published 2016-05-17

Keywords

  • Array,
  • Array,
  • Array
Copyright Notice

How to Cite

Electrical and thermal characterization of a composite material of HDPE/PPy/CB/CNT. (2016). Acta Universitaria, 26(2), 55-62. https://doi.org/10.15174/au.2016.980

Abstract

The study of composite materials has had a fundamental importance in scientific research and technological applications, due to their different properties. This paper aims to describe the characterization of thermal and electrical properties of the composite materials of polypyrrole (PPy)/carbon black (CB)/carbon nanotube (CNT) in a matrix of high density polyethylene (HDPE). The electrical properties of the composites were studied by the van der Pauw method and current-temperature. Obtained resistivity results were up to 1.07E-01 Ω.cm for composite materials HDPE/PPy/CB/CNT. The impedance spectroscopy study showed that there is no charge retention material, behaving similarly as a semiconductor. Thermogravimetric analysis TGA showed increased thermal resistivity of the composites conferred by the presence of the fillers used. Morphology was studied by scanning electron microscopy (SEM), showing the distribution of load, aggregate formation and conductors in the composite bridges.

PDF (Spanish) HTML (Spanish)
Ecua1pdf (Spanish) Ecua1 (Spanish)

References

  3. Abron, K., Wahit, M. U. B., & Bahraeian, S. (2011). A study on thermal and electrical properties of high density polyethylene/high density polyethylene grafted maleic anhydride/montmorillonite/polypyrrole blend. Scientific Research and Essays, 6(30), 6285-67292. doi: 10.5897/SRE11.1084

  8. Ai-Saleh, M. H., & Sundararaj, U. (2010). Processing-microstructure property relationship in conductive polymer nanocoposites. Polymer, 12(51), 2740-2747. doi: 10.1016/j.polymer.2010.03.022


  12. Chung, D. D. L. (2001). Thermal Analysis by Electrical Resistivity Measurent. Journal of Thermal Analysis and Calorimetry, 65(1), 133-165). doi: 10.1023/A:1011584803863


  17. Elyashevich, G. K., Rosova, E. Y., Sidorovich, A. V., Kuryndin, I. S., Trchova, M., & Stejskal, J. (2003). The effect of a polypyrrole coating on the thermal stability of microporous polyethylene membranes. European Polymer Journal, 39(4), 647-654. doi: 10.1016/S0014-3057(02)00282-3


  20. Farshidfar, A., Haddadi-Asl, V., & Nazokdast, H. (2006). Electrical and Mechanical Properties Of Conductive Carbon Black/ Polyolefin Composites Mixed With Carbon Fiber. Journal of ASTM International, 3(10), 1-8. doi: 10.1520/JAI100431


  24. Grayson, M. (1999). Anomalous temperature dependence of the electrical conductivity of carbon-poly (mehyl methacrylate) composites. Materials Research Bulletin, 34(4), 603-611. doi: 10.1016/S0025-5408(99)00043-4


  27. Huang, J. C. (2002). Carbon Black Filled Conducting Polymers and Polymer Blends. Advances in Polymer Technology, 21(4), 299-313. doi: 10.1002/adv.10025


  30. Hindermann, B. M., & Ehrburger-Dolle, F. (2001). Electrical conductivity of carbon black-polyethylene composites Experimental evidence of the change of cluster connectivity in the PTC effect. Carbon, 39(3), 375-382. doi: 10.1016/S0008-6223(00)00130-5


  33. Liang, X., Wen, Z., Liu, Y., Zhang, H., Jin, J., Wu, M., & Wu, X. (2012). A composite of sulfur and polypyrrole-multiwalled carbon combinatorial nanotube as cathode for Li/S battery. Journal of Power Sources, 206(15), 409-413. do: 10.1016/j.jpowsour.2012.01.123


  36. Omastova, M., Podhradska, M., Prokes, J., Janigova, I., & Stejskal, J. (2003). Thermal ageing of conducting polymeric composites, Polymer Degradation and Stability, 82(2), 251-256. doi: 10.1016/S0141-3910(03)00218-0


  39. Patiño Reyes, A., Olarte Paredes, A., Salgado Delgado, R., Salgado Delgado, A. M., Vargas Galarza, Z., García Hernández, E., & Rubio Rosas, E. (2014). Efecto de percolación eléctrica del material reforzado de HDPE/PPy. Revista Iberoamericana de Polímeros, 15(3), 172-177.


  42. Sahoo, N. G., Jung, Y. C., So, H. H., & Cho, J. W. (2007). Alloys and Composites of Polybenzoxazines: Properties and Applications. Springer: Singapore. doi: 10.1007/978-981-4451-76-5.


  45. Sahoo, N. G., Jung, Y. C., So, H. H., & Cho, J. W. (2007). Polypyrrole coated carbon nanotubes: synthesis, characterization, and enhanced electrical properties. Synthetic Metals, 157(8-9), 374-379. doi: 10.1016/j.synthmet.2007.04.006


  48. Sato-Green, K. (2007). Transport Properties of Carbon Nanotube/Polymer Composite Films (Thesis Bachelor). Michigan University: USA.


  51. Schulz, B., Orgzall, I., Díez, I., Dietzel, B., & Tauer, K. (2010). Template mediated formation of shaped polypyrrole particles. Journal of Physicochemical, 354(1-3), 368-376. doi:10.1016/j.colsurfa.2009.11.034


  54. Shen, L., Wang, F. Q., Yang, H., & Meng, Q. R. (2011). The combined effects of carbon black and carbon fiber on the electrical properties of composites based on polyethylene or polyethylene/polypropylene blend. Polymer Test, 30(4), 442-448. doi: 10.1016/j.polymertesting.2011.03.007


  57. Shin, S. G., & Kwon, I. K. (2011). Effect of Temperature on the Dielectric Properties of Carbon Black-Filled Polyethylene Matrix Composites below the Percolation Threshold. Electron Materials Letter, 7(3), 249-254. doi: 10.1007/s13391-011-0913-1


  60. Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010). Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties. Progress in Polymer Science, 35(3), 357-401. doi: 10.1016/j.progpolymsci.2009.09.003


  63. Tang, W., Santare, M. H., & Advani, S. G. (2003). Melt processing and mechanical property characterization of multi-walled carbon nanotube/high density polyethylene (MWNT/HDPE) composite Films. Carbon, 41(14), 2779-2785. doi: 10.1016/S0008-6223(03)00387-7


  66. Vigil, O., Martel, A., & Picquart, M. (2008), Física de semiconductores. México: Trillas.


  69. Webster, J. B. (1999). Measurement, Instrumentation, and Sensors Handbook: Spatial, Mechanical, Thermal, and Radiation Measurement (1st ed). USA: CRC Press LLC. doi: 10.1201/b15474-74


  73. Wen, M., Sun, X., Su, L., Shen, J., Li, J., & Guo, S. (2012). The electrical conductivity of carbon nanotube/carbon black/polypropylene composites prepared through multistage stretching extrusion. Polymer, 53(7), 1602-1610. doi: 10.1016/j.polymer.2012.02.003


  77. Yavuz, Ö., Ram, M. K., Aldissi, M., Poddar, P., & Srikanth, H. (2005). Polypyrrole composites for shielding applications. Synthetic Metals, 151(3), 211-217. doi: 10.1016/j.synthmet.2005.05.011


  81. Zhang, B., Xu, Y., Zheng, Y., Dai, L., Zhang, M., Yang, J., Chen, Y., Chen, Y., Chen, X., & Zhou, J. (2011). A Facile Synthesis of Polypyrrole/Carbon Nanotube Composites with Ultrathin, Uniform and Thickness-Tunable Polypyrrole Shells. Nanoscale Research Letters, 6(1), 1-9. doi: 10.1186/1556-276X-6-431


  85. Zhang, W., Dehghani-Sanij, A. A., & Blackburn, R. S. (2007). Carbon based conductive polymer composites. Journal of Materials Science, 42(10), 3408-3418. doi: 10.1007/s10853-007-1688-5