Vol. 14 Núm. 1 (2004)
Artículos de investigación

Automatic Instrumentation with a PC-based Data Acquisition System for Experiments in Optical Characterization of Materials

PDF
  • J. A. Andrade Lucio,
  • O. Vite-Chávez,
  • Roberto Olivera-Reyna,
  • Reynel Olivera-Reyna,
  • O. G. Ibarra-Manzano,
  • E. Alvarado-Méndez,
  • R. Rojas-Laguna,
  • J. M. Estudillo-Ayala,
  • M. Trejo-Durán,
  • H. Gutiérrez-Martín
J. A. Andrade Lucio
O. Vite-Chávez
Roberto Olivera-Reyna
Reynel Olivera-Reyna
O. G. Ibarra-Manzano
E. Alvarado-Méndez
R. Rojas-Laguna
J. M. Estudillo-Ayala
M. Trejo-Durán
H. Gutiérrez-Martín

Publicado 2004-04-01

Palabras clave

  • Array,
  • Array,
  • Array
Aviso de derechos de autor/a

Cómo citar

Andrade Lucio, J. A., Vite-Chávez, O., Olivera-Reyna, R., Olivera-Reyna, R., Ibarra-Manzano, O. G., Alvarado-Méndez, E., Rojas-Laguna, R., Estudillo-Ayala, J. M., Trejo-Durán, M., & Gutiérrez-Martín, H. (2004). Automatic Instrumentation with a PC-based Data Acquisition System for Experiments in Optical Characterization of Materials. Acta Universitaria, 14(1), 14-18. https://doi.org/10.15174/au.2004.232

Resumen

A simple automatic control for applications of optical characterization of materials using theoptical Z-scan technique is presented in this paper. The emphasis is placed in the automation process. For this purpose, a communication I/O port of a PCI-MIO-16E data acquisition card (from National Instruments) was used and the graphical programming language LabVIEW.
PDF

Referencias